www.industryemea.com
19
'26
Written on Modified on
Antaira highlights conformal-coated industrial PoE+ switch for harsh environments
The LNP-1002G-SFP-T-CC protects network circuitry against corrosive gases, moisture and dust in water treatment, mining and chemical processing applications.
www.antaira.com

The Antaira LNP-1002G-SFP-T-CC 10-port industrial PoE+ unmanaged Ethernet switch is protected by an advanced conformal coating that seals it against sulfur dioxide, chloride, moisture, and dust.
Antaira is highlighting its LNP-1002G-SFP-T-CC, a 10-port industrial PoE+ unmanaged Ethernet switch with a conformal coating designed to protect its circuitry from corrosive gases, moisture and dust. Proven to IEC, MIL, IPC and ISA standards, the coating helps keep Gigabit PoE+ connectivity running in demanding industrial environments, combining board-level protection, Gigabit connectivity and PoE+ power in a single unit.
Board-level protection for harsh environments
The conformal coating follows the contours of the printed circuit board, providing a protective barrier against contaminants that can damage exposed electronics. This added protection supports applications in water and wastewater treatment, mining, chemical processing and coastal installations. A rugged IP30 metal enclosure, surge and ESD protection, and an operating temperature range of -40 to 75°C support industrial deployment, and the switch is UL Class I, Division 2 certified for use in hazardous locations.
Gigabit connectivity and PoE+ power
Eight Gigabit Ethernet ports support IEEE 802.3at PoE+, supplying up to 30 W per port to devices such as IP cameras and wireless access points, while two 100/1000 SFP slots support fibre uplinks for long-distance connections. For power reliability, the switch features redundant 48–55 VDC inputs with reverse polarity protection and a built-in relay output for power-failure alerts. DIN-rail and wall-mount options provide installation flexibility. The LNP-1002G-SFP-T-CC is available now and is backed by Antaira's five-year warranty.
Additional Context:
This section explains general principles of conformal coating not included in the original press release.
In industrial sites such as wastewater plants, mines and chemical facilities, the air can contain corrosive gases such as sulfur compounds and chlorides. When these settle on a circuit board together with moisture, they can corrode copper traces and solder joints and, over time, create leakage paths or short circuits between closely spaced conductors.
A conformal coating is a thin protective polymer layer, commonly based on acrylic, silicone, urethane or similar materials, applied over an assembled circuit board so that it follows the shape of the components. It shields the electronics from moisture, dust and chemical contaminants while adding very little weight or thickness, which makes it suitable for compact devices such as industrial network switches.
Edited by an industrial journalist, Lekshman Ramdas, with AI assistance.
www.antaira.com
Antaira is highlighting its LNP-1002G-SFP-T-CC, a 10-port industrial PoE+ unmanaged Ethernet switch with a conformal coating designed to protect its circuitry from corrosive gases, moisture and dust. Proven to IEC, MIL, IPC and ISA standards, the coating helps keep Gigabit PoE+ connectivity running in demanding industrial environments, combining board-level protection, Gigabit connectivity and PoE+ power in a single unit.
Board-level protection for harsh environments
The conformal coating follows the contours of the printed circuit board, providing a protective barrier against contaminants that can damage exposed electronics. This added protection supports applications in water and wastewater treatment, mining, chemical processing and coastal installations. A rugged IP30 metal enclosure, surge and ESD protection, and an operating temperature range of -40 to 75°C support industrial deployment, and the switch is UL Class I, Division 2 certified for use in hazardous locations.
Gigabit connectivity and PoE+ power
Eight Gigabit Ethernet ports support IEEE 802.3at PoE+, supplying up to 30 W per port to devices such as IP cameras and wireless access points, while two 100/1000 SFP slots support fibre uplinks for long-distance connections. For power reliability, the switch features redundant 48–55 VDC inputs with reverse polarity protection and a built-in relay output for power-failure alerts. DIN-rail and wall-mount options provide installation flexibility. The LNP-1002G-SFP-T-CC is available now and is backed by Antaira's five-year warranty.
Additional Context:
This section explains general principles of conformal coating not included in the original press release.
In industrial sites such as wastewater plants, mines and chemical facilities, the air can contain corrosive gases such as sulfur compounds and chlorides. When these settle on a circuit board together with moisture, they can corrode copper traces and solder joints and, over time, create leakage paths or short circuits between closely spaced conductors.
A conformal coating is a thin protective polymer layer, commonly based on acrylic, silicone, urethane or similar materials, applied over an assembled circuit board so that it follows the shape of the components. It shields the electronics from moisture, dust and chemical contaminants while adding very little weight or thickness, which makes it suitable for compact devices such as industrial network switches.
Edited by an industrial journalist, Lekshman Ramdas, with AI assistance.
www.antaira.com

