www.industryemea.com

ANDRITZ to modernise German biomass boiler for fuel flexibility

The international technology group will install an open-grid nozzle floor and upgraded ash extraction system on the 49 MW bubbling fluidised bed boiler in Herbrechtingen.

  www.andritz.com
ANDRITZ to modernise German biomass boiler for fuel flexibility

International technology group ANDRITZ has received an order to modernise the biomass boiler at the combined heat and power (CHP) plant in Herbrechtingen, southern Germany. Scheduled for installation and commissioning in August 2027, the upgrade will prepare the 49 MW bubbling fluidised bed boiler for operation with a broader range of fuels. The order has been booked into ANDRITZ's order intake for the fourth quarter of 2026.

Upgrading bed ash removal and pressure parts
Under the scope of the contract, ANDRITZ will engineer, supply and install a new open-grid nozzle floor, alongside carrying out the required dismantling and pressure-part modifications. The upgrade will improve bed ash removal and support the boiler's future operation with a broader range of fuels, and the existing bed ash extraction system will also be replaced with a modern ANDRITZ solution. Jürgen Wiedenmann, Managing Director of Biomasse-Heizkraftwerk Herbrechtingen GmbH, noted that the modifications will strengthen plant reliability while establishing the foundation for more flexible operation.

Adapting existing boilers to changing requirements
The project underscores ANDRITZ's capability to adapt existing boilers to changing operational requirements, regardless of the original equipment supplier. Martin Pogoreutz, Vice President Multifuel Boiler Plant and Power Plant Service at ANDRITZ, emphasised that a modernisation must fit both the boiler's operating conditions and the customer's future needs, helping operators respond to new challenges while making the best use of existing equipment.

Additional Context:
This section explains general principles of bubbling fluidised bed combustion and ash management not included in the original press release.

In a bubbling fluidised bed (BFB) boiler, combustion air is blown upward through a bed of sand and fuel particles at a velocity sufficient to suspend the solids in a turbulent, fluid-like state without carrying them out of the furnace. This intense mixing allows BFB boilers to burn varied, high-moisture biomass fuels efficiently at controlled combustion temperatures, which also limits the formation of nitrogen oxides.

Lower-grade biomass fuels often contain more non-combustible impurities, such as stones, metal pieces and ash, which can cause the bed to agglomerate or block conventional air-distribution plates. An open-grid nozzle floor leaves open paths between the air nozzles, allowing coarse bed material and impurities to fall through to the ash extraction system below without disrupting fluidisation.

Edited by an industrial journalist, Lekshman Ramdas, with AI assistance.

www.andritz.com

  Ask For More Information…

LinkedIn
Pinterest

Join the 155,000+ IMP followers