www.industryemea.com

Greater efficiency and continuity in industrial cooling

Rossi Launches Bevel Helical G Cooling System (PO5L) Gear Reducer to Complete Industrial Cooling Tower and Air-Cooled Condenser Portfolio.

  www.rossi.com
Greater efficiency and continuity in industrial cooling

Large-scale thermal power plants, petrochemical complexes, mining operations, and hyperscale data centers depend on continuous heat dissipation through wet evaporative cooling towers and dry air-cooled condensers (ACCs). Within these installations, fan drive gear reducers operate under relentless 24/7 duty cycles inside hot, moisture-saturated vapor plenums or exposed outdoor structures subject to sub-zero winter cold starts. Standard industrial gearboxes frequently suffer from thermal bottlenecks in high-ambient climates, structural vibration transmitted into lightweight fan shrouds, or lubricant starvation on upper vertical-shaft bearings during cold weather startups. Furthermore, because cooling tower OEMs size fan blade pitch and tip speed precisely around thermal rejection targets, wide gaps between standard gearbox transmission ratios often force costly mechanical redesigns or suboptimal fan operating speeds. Overcoming these reliability and integration constraints requires application-specific right-angle and parallel-shaft gearboxes engineered with tightly stepped gear ratios, enhanced passive and forced housing cooling, vibration-damped housings, and self-contained lubrication circuits compliant with Cooling Technology Institute (CTI) standards.

Dedicated Bevel Helical GCS (PO5L) for Wet Cooling Towers and W-Style ACCs
To provide a dedicated right-angle drive solution for medium-to-large wet cooling towers and W-style air-cooled condensers, Rossi placed the bevel helical G Cooling System (GCS PO5L) gear reducer into full production in October 2026. Developed directly in collaboration with cooling tower manufacturers, the GCS builds upon the proven internal gearing and components of Rossi’s flagship G Series—preserving established mechanical reliability and global spare-parts availability—while introducing a redesigned external housing optimized specifically for vertical-output fan drives.

Unlike general-purpose gear reducers, the GCS features more closely spaced transmission ratios aligned with standard cooling tower fan speeds, minimizing engineering redesigns, shortening delivery lead times, and reducing system costs. Produced across four frame sizes (250, 283, 321, and 360), the unit features a smooth, uniform housing geometry that prevents moisture accumulation and corrosion while supporting high-durability industrial paint systems. Engineered for a service life of up to 30 years, the gearbox incorporates ground gears, integral mounting feet, and a patent-pending fan cover fastening system that suppresses structural vibration and acoustic emissions.

Concurrent Engineering and CFD-Validated Thermal Management
To validate thermal stability in high-ambient climates without extensive physical prototyping, Rossi’s engineering team utilized a concurrent engineering workflow integrating Computational Fluid Dynamics (CFD) simulations alongside aerospace-derived qualitative airflow visualization techniques. Federico Prosperi from Rossi’s R&D Department noted that optimizing housing geometries, ventilation pathways, surface protection, and mounting flexibility around tested G Series internals yielded an application-tailored reducer built on proven mechanical heritage. Andrea Settimo, G Cooling System Project Manager at Rossi, added that running CFD modeling, structural simulation, and experimental verification in parallel accelerated design maturity and resolved thermal and aerodynamic issues early in development.

The bevel helical GCS complies with applicable ISO standards as well as Cooling Technology Institute standards CTI 111 and CTI 167, targeting key global industrial and power-generation markets across Northern Europe, France, Spain, North and South America, Southeast Asia, the Middle East, India, and South Africa.

Patented Helical PP5A for Dry A-Style Air-Cooled Condensers
Complementing the new right-angle GCS, Rossi pairs the launch with its patented helical PP5A gear reducer—introduced in 2020 specifically for dry A-style air-cooled condensers where bottom-mounted axial fans dissipate heat without water consumption in arid regions. Certified to CTI 167 and offered in four frame sizes (250, 280, 320, and 360) covering roughly 90 percent of dry-cooling market demand, the vertical-shaft PP5A utilizes a patented dual-oil-bath chamber design.

By keeping all upper bearings continuously submerged in oil at all times, the architecture eliminates the need for electric oil sump heaters during cold starts down to minus 10 to minus 15 degrees Celsius. Once operational, an integrated mechanical slave pump continuously recirculates lubricant between the two chambers without external electric motors, while an accessible sump, pump, filter, and dry-well output seal prevent oil leakage into the condenser airflow. As highlighted by Alessandro Dell’Anna of Rossi’s R&D Combined and Drive Units department, the dual-chamber architecture increases gearbox thermal capacity by 20 to 30 percent over a standard G gearbox of equivalent size while reducing required oil volume by roughly one-third.

Additional Context
This section details technical specifications and competitive benchmarking not included in the original product announcement.

In industrial cooling tower and air-cooled condenser drive engineering governed by Cooling Technology Institute Standard CTI STD-111 (Gear Speed Reducers for Application on Industrial Water Cooling Towers) and CTI STD-167 (Gear Speed Reducers for Application on Air-Cooled Condensers) alongside AGMA 6013-B16, vertical output shafts must sustain heavy axial aerodynamic thrust loads and cyclic bending moments from multi-blade composite fans spanning up to 10 meters in diameter. Under CTI 111 and CTI 167 mandates, gearboxes require a minimum mechanical service factor of 2.0 based on motor nameplate power and an L10h bearing design life exceeding 100,000 hours, paired with heavy-duty tapered roller bearings and dry-well lower output shaft housings (an internal annular dam surrounding the output shaft) that prevent lubricant leakage even if primary lip seals wear over decades of continuous service. Furthermore, applying UNI EN ISO 12944-2 C4 and C5-M high-durability multi-coat epoxy and polyurethane paint systems over smooth, rib-free cast iron housings prevents galvanic and crevice corrosion inside hot, chlorinated, 100-percent-humidity cooling tower plenums.

Within the specialized cooling tower and air-cooled condenser gear drive market, Rossi’s GCS (PO5L) and PP5A portfolio benchmarks directly against dedicated cooling-duty gearboxes from Amarillo Gear Company (Right-Angle Spiral Bevel Cooling Tower Drives), Marley / SPX Cooling Technologies (Geareducer series), Flender (right-angle and vertical helical ACC gear units), Sumitomo Drive Technologies (Hansen P4 Cooling Tower and ACC series), and Bonfiglioli / Rexnord (Falk V-Class cooling tower drives). While North American incumbents like Amarillo Gear and SPX Marley hold deep installed bases in traditional wet cooling towers and Flender leads large utility-scale European ACC installations, Rossi differentiates its offering by uniting both wet-cooling right-angle bevel helical drives (GCS) and dry-cooling parallel-shaft helical drives (PP5A) under a unified four-size modular platform. By pairing CFD-optimized external housings with high-volume G Series internal gear sets and patented dual-chamber cold-start lubrication, Rossi provides global EPC contractors and heat-exchanger OEMs with shorter manufacturing lead times, reduced oil inventory costs, and standardized global aftermarket support.

Edited by Romila DSilva, Induportals Editor, with AI assistance.

www.rossi.com

  Ask For More Information…

LinkedIn
Pinterest

Join the 155,000+ IMP followers