www.industryemea.com
05
'26
Written on Modified on
Rollon Showcases Advanced Motion Solutions Across Three Major September Industry Exhibitions
Company highlights linear, rotary and automation technologies supporting manufacturing, rail and medical applications with enhanced precision, reliability and performance.
www.rollon.com
XL Xtrem Load
Rollon is exhibiting its portfolio of linear and rotary motion solutions at upcoming international industry exhibitions to address the technical demands of the metalworking, railway, and healthcare sectors. The showcased systems incorporate magnetic sequencing tracks, high-performance ball screws, and single-belt gantry configurations designed to optimize precision and reliability for automated manufacturing.
High-Performance Ball Screws and Linear Guides for Metalworking
At the AMB exhibition taking place from September 15 to 19 at Messe Stuttgart, Rollon and Shuton-Ipiranga will present high-performance ball screws and linear solutions for industrial applications at booth 6D64. The technical showcase includes the Shuton-Ipiranga ball screw portfolio, featuring the XL Xtrem Load series engineered for high dynamics and heavy-load applications, the XP Xtrem Position series designed for highly accurate positioning tasks, and the XT Xtrem Transport series developed for automation environments. Additionally, advanced linear guide solutions such as the MG Rail and Cross Roller Rails from Rosa Sistemi, alongside the Heavy Line system from Nadella, will be exhibited to address increasing market demands for mechanical reliability and load capacity.
Cross Roller Rails
Railway Technology and Magnetic Telescopic Rail Systems
During InnoTrans, scheduled for September 22 to 25 in Berlin, Germany, Rollon will exhibit its technologies for the railway industry alongside its parent organization, The Timken Company, and affiliated brands including GGB, Bijur Delimon, Groenveld-Beka, and Durbal. Operating across two exhibition spaces, booth 560 will feature engineered bearings and linear motion solutions, while booth 760 will focus on lubrication and filtration systems. A primary technological highlight will be the introduction of the Rollon HVC-MG telescopic rails. The new MG hardware architecture integrates magnetic technology to enable the sequential opening of rail elements. This magnetic sequencing mechanism improves structural load distribution, supports smoother physical extension, and increases overall system durability under demanding operating conditions.
Heavy Line
Cartesian Motion Gantry Systems for Medical Automation
At the Medical Technology exhibition in Galway, Ireland, held from September 23 to 24, Rollon will demonstrate motion control technology for the healthcare sector at booth 320. The presentation will feature the H-Bot gantry system, which incorporates a single-belt design and flexible motor-mounting options. This mechanical architecture delivers compact, accurate, and coordinated Cartesian motion, making the system highly suitable for automated medical equipment requiring exact positioning within constrained physical spaces.
H-Bot
Comprehensive Motion Control Technology Portfolio
The integrated engineering portfolio encompasses linear and curved guides, telescopic rails, linear actuators, multi-axis systems, Robot Transfer Units, circular systems, ball screws, rod ends, and spherical plain bearings. This hardware consolidation allows machine builders and original equipment manufacturers to construct efficient and robust mechanical systems tailored to the exact performance requirements of the manufacturing, transportation, healthcare, and industrial automation sectors.
Additional Context:
This section details technical specifications and competitive benchmarking not included in the original product announcement
Within the high-capacity linear motion and ball screw markets, Rollon and its affiliated brands compete directly with established global manufacturers such as THK, NSK, and Bosch Rexroth. The introduction of magnetic sequential opening in the Rollon HVC-MG telescopic rails presents a measurable technical differentiation compared to traditional heavy-duty slides that rely on mechanical stops or friction-based staging mechanisms. By utilizing integrated magnets to control the staging of rail segments, the HVC-MG reduces the initial pull force required and optimizes load distribution across the ball cages during extension. For ball screw applications, the Shuton-Ipiranga XL, XP, and XT series address the same high-rigidity and precision demands targeted by the NSK Super Ball Screw line and Bosch Rexroth automated factory solutions, specifically competing on dynamic load ratings and positional repeatability in high-throughput metalworking environments.
Edited by Natania Lyngdoh, Induportals editor, assisted by AI.
www.rollon.com
Rollon is exhibiting its portfolio of linear and rotary motion solutions at upcoming international industry exhibitions to address the technical demands of the metalworking, railway, and healthcare sectors. The showcased systems incorporate magnetic sequencing tracks, high-performance ball screws, and single-belt gantry configurations designed to optimize precision and reliability for automated manufacturing.
High-Performance Ball Screws and Linear Guides for Metalworking
At the AMB exhibition taking place from September 15 to 19 at Messe Stuttgart, Rollon and Shuton-Ipiranga will present high-performance ball screws and linear solutions for industrial applications at booth 6D64. The technical showcase includes the Shuton-Ipiranga ball screw portfolio, featuring the XL Xtrem Load series engineered for high dynamics and heavy-load applications, the XP Xtrem Position series designed for highly accurate positioning tasks, and the XT Xtrem Transport series developed for automation environments. Additionally, advanced linear guide solutions such as the MG Rail and Cross Roller Rails from Rosa Sistemi, alongside the Heavy Line system from Nadella, will be exhibited to address increasing market demands for mechanical reliability and load capacity.
Cross Roller Rails
Railway Technology and Magnetic Telescopic Rail Systems
During InnoTrans, scheduled for September 22 to 25 in Berlin, Germany, Rollon will exhibit its technologies for the railway industry alongside its parent organization, The Timken Company, and affiliated brands including GGB, Bijur Delimon, Groenveld-Beka, and Durbal. Operating across two exhibition spaces, booth 560 will feature engineered bearings and linear motion solutions, while booth 760 will focus on lubrication and filtration systems. A primary technological highlight will be the introduction of the Rollon HVC-MG telescopic rails. The new MG hardware architecture integrates magnetic technology to enable the sequential opening of rail elements. This magnetic sequencing mechanism improves structural load distribution, supports smoother physical extension, and increases overall system durability under demanding operating conditions.
Heavy Line
Cartesian Motion Gantry Systems for Medical Automation
At the Medical Technology exhibition in Galway, Ireland, held from September 23 to 24, Rollon will demonstrate motion control technology for the healthcare sector at booth 320. The presentation will feature the H-Bot gantry system, which incorporates a single-belt design and flexible motor-mounting options. This mechanical architecture delivers compact, accurate, and coordinated Cartesian motion, making the system highly suitable for automated medical equipment requiring exact positioning within constrained physical spaces.
H-Bot
Comprehensive Motion Control Technology Portfolio
The integrated engineering portfolio encompasses linear and curved guides, telescopic rails, linear actuators, multi-axis systems, Robot Transfer Units, circular systems, ball screws, rod ends, and spherical plain bearings. This hardware consolidation allows machine builders and original equipment manufacturers to construct efficient and robust mechanical systems tailored to the exact performance requirements of the manufacturing, transportation, healthcare, and industrial automation sectors.
Additional Context:
This section details technical specifications and competitive benchmarking not included in the original product announcement
Within the high-capacity linear motion and ball screw markets, Rollon and its affiliated brands compete directly with established global manufacturers such as THK, NSK, and Bosch Rexroth. The introduction of magnetic sequential opening in the Rollon HVC-MG telescopic rails presents a measurable technical differentiation compared to traditional heavy-duty slides that rely on mechanical stops or friction-based staging mechanisms. By utilizing integrated magnets to control the staging of rail segments, the HVC-MG reduces the initial pull force required and optimizes load distribution across the ball cages during extension. For ball screw applications, the Shuton-Ipiranga XL, XP, and XT series address the same high-rigidity and precision demands targeted by the NSK Super Ball Screw line and Bosch Rexroth automated factory solutions, specifically competing on dynamic load ratings and positional repeatability in high-throughput metalworking environments.
Edited by Natania Lyngdoh, Induportals editor, assisted by AI.
www.rollon.com
